With the increasing requirements of clients and designers in both fixed installations and events/concerts, the need for sophisticated solutions for signal transportation and data distribution is inevitable. Also, latest technical developments and requirements have to be met.
The MA 8Port Node, MA 4Port Node,MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) set an additional benchmark in MA Lighting’s networking product range as they feature the 1Gbit/s bandwidth capability. They allow the conversion of Ethernet data into DMX or vice versa and fit perfectly into the grandMA2 system and its MA-Net2 protocol, which is based on this high speed to ensure maximum performance. Optimised for touring and installation purposes, all products have a rugged steel housing for a long life even under harsh conditions. The Nodes offer a menu button, a USB connector and a 2" colour TFT as well as LEDs displaying the current status. All of these ensure a comfortable operation. The MA xPort Nodes are fully configurable from the grandMA2 consoles or from grandMA2 onPC. To achieve the highest flexibility, each DMX port can be individually configured as DMX in or DMX out.
The MA 4Port Node WM (Wall Mount) is the perfect solution for converting a midsized amount of DMX universes at the same location where no additional power supply is available. The MA 4Port Node WM is powered via PoE (Power over Ethernet) and therefore does not need additional power supply. As a standard the MA 4Port Node WM (Wall Mount) will be delivered with a wall-mount plate with inside screws. Also available as accessory there is a wall-mount plate with outside screw-mounts and a rigging-adapter plate. The four DMX outputs are located at the bottom of the unit. The RJ45 connector for Ethernet connections is located inside, but can be re-located for the rigging-version to the outside.
|Technical specifications for Art.-No.: 130210|
|Operating voltage/ Supply voltage||PoE (IEEE802.3af / 350mA)|
|Power||PoE (IEEE802.3af / 350mA)|
|Dimensions||147 x 42 x 157mm / 5.8 x 1.7 x 6.2inch|
|Net weight||1.0kg / 2.2lbs|
|Output connectors||4 x XLR 5pin (DMX), 1 x RJ45|
|130287||MA 2/4 Port Node WM adapter plate wall-mount large|
|130288||MA 2/4 Port Node WM rigging plate for coupler mounting|
|130286||MA 2/4 Port Node WM RJ45 etherCON adapter set|
01 | 2018
A celebration of Finnish history
12 | 2017
Rock’n’Roll history live on tour
11 | 2017
Clear message sent
11 | 2017
Complex network set-up controlled with MA Network Switch
08 | 2017
World premiere festival experience
07 | 2017
Far from being dead