С возрастающими требованиями пользователей и проектировщиков в инсталляциях и турах, необходимость в сложных решениях для передачи сигнала и распределения данных неизбежна. Также последние технические достижения и требования приветствуются.
The MA 8Port Node, MA 4Port Node,MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) set an additional benchmark in MA Lighting’s networking product range as they feature the 1Gbit/s bandwidth capability. They allow the conversion of Ethernet data into DMX or vice versa and fit perfectly into the grandMA2 system and its MA-Net2 protocol, which is based on this high speed to ensure maximum performance. Optimised for touring and installation purposes, all products have a rugged steel housing for a long life even under harsh conditions. The Nodes offer a menu button, a USB connector and a 2" colour TFT as well as LEDs displaying the current status. All of these ensure a comfortable operation. The MA xPort Nodes are fully configurable from the grandMA2 consoles or from grandMA2 onPC. To achieve the highest flexibility, each DMX port can be individually configured as DMX in or DMX out.
Furthermore all MA xPort Nodes are available as an onPC version to provide parameters for standalone onPC stations (for more details see: MA onPC solutions).
The MA 2Port Node is the perfect solution for converting a small amount of DMX universes at the same location. The MA 2Port Node is available in different fittings for adapting to multiple applications. First there is the basic version based on a 9"/1HU housing, where all connectors are located on the back. Additionally an add-on fitting is available to mount this basic version into a 19" rack. Second a special fitting can be used where all connectors on the back of the MA 2Port Node are mirrored on an additional front panel for an easier access when rackmounted. Third possibility is to combine two MA 2Port Node for rack use by adding rack mounting brackets and a special threaded fastener between the two single MA 2Port Node units. Fourth option is the additionally available rigging plate for mounting couplers or clamps on the MA 2Port Node. The two DMX outputs as well as the main switch, one powerCON and one etherCON connector are located at the rearside of the Node.
|Технические характеристики для Артикула 130221|
|Рабочее напряжение||100V–240V, 50/60Hz|
|Размеры||210 x 45 x 185mm/8.3 x 1.8 x 7.3inch|
|Вес нетто||1.3kg / 2.9lbs|
|Выходные разъемы||2 x XLR 5pin (DMX), 1 x CTRL (future use), 1 x etherCON|
|Входные разъемы||1 x powerCON|
|130281||MA 4Port Node 19" rack mounting kit – blank panel|
|130285||MA 2Port Node 19" rack mounting kit – XLR connectors|
|130283||MA 4Port Node 19" rack mounting kit – 2 x 4Port Node|
|130284||MA 4Port Node rigging plate|
|210650||Adapter cable set MA 2Port Node, 2 x DMX/XLR5, 1 x etherCON RJ45|
01 | 2018
A celebration of Finnish history
12 | 2017
Rock’n’Roll history live on tour
11 | 2017
Clear message sent
11 | 2017
Complex network set-up controlled with MA Network Switch
08 | 2017
World premiere festival experience
07 | 2017
Far from being dead